Showing 113–128 of 165 results
VEGO Dynamic PS 30 / Medium capacity vertical processing buffer
The buffer receives the PCB’s from upstream and stores them utilising a vertically toothed belt. Once downstream is calling for a board, the buffer will index, down to release the last board. Only LIFO mode is possible.
Features
Open construction
Minimal floor space required
Simple operation
Electric width adjusting
Manual removal of PCB’s
Possible use as either
VEGO Dynamic STM 03 / Shuttle module for lateral displacement of modules
The STM 03 shuttle is designed for insertion and removal of PCB‘s from two production lines as well as lateral displacement. Incoming PCB‘s are taken over by the integrated conveyor segment, moved laterally and handed over to the next machine. The takeover and handover positions are freely programmable.
Features
Stepper motor with
VEGO Dynamic STM 03D / Shuttle module for lateral displacement of modules within dual lane system
The STM 03D Shuttle module is created to space out PCB’s in SMD production lines within dual lane system. Incoming PCB‘s are taken over by the integrated conveyor segment, moved laterally and handed over to the next machine. The takeover and handover positions are freely programmable.
Features
Stepper motor with positioning control
Programmable
VEGO Dynamic TDM 06 / Walkthrough Telescope Gate within production lines
The TDM 06 walkthrough telescope gate provides an intermediate passageway through a production line with no lasting effect on the production flow. The basis model consists of a telescopic conveyor with a horizontal moving conveyor mechanism.
The PCB is taken over at the inlet and the horizontal conveyor extends to hand
VEGO Dynamic TRM 01-04 / Conveyor modules
TRM transport modules are used to buffer or transfer PCBs between process machines. The strong steel tube frame is particularly robust and consists of an integrated control cabinet and a table construction to support the conveyor.
The PCB is taken over from the upstream system and handed over to the downstream
VEGO Dynamic WS 01 / 180° inline flip station for PCB’s
The WS01 is used to flip PCBs in production lines for backside assembly or marking.
The PCB is halted with a stopper and the complete transport mechanism flips around 180° in the direction of transport. The PCB is subsequently handed over to the downstream machine.
Features
Color display with graphical user interface
Product parameters
WH-C100HD3BL high-end conveyor
We also have high-end versions for all our series of standard conveyors. The look is nicer, with aluminum finishings, and tough a bit more expensive than the standard ones, it can give a nicer image to your SMT line as a whole. Feel free to inquire for details about this
WH-C100SD3BL standard conveyor
These SMEMA-compatible transfer conveyors are used for equipment linking, visual inspection, manual assembly, and PCB buffering functions. With a range going from 1m to 2.5m long, the front rail is stationary while rear rail adjusts to desired width with a hand crank. Conveyor speed is dial adjustable from 0.5 -
WH-C100SD3BL-D workstation
These SMEMA-compatible transfer workstations are used normally for visual inspection and manual assembly. With a range going from 1m to 1.5m long, the front rail is stationary while rear rail adjusts to desired width with a hand crank. Conveyor speed is dial adjustable from 0.5 - 20 m/min. When the
WH-C100ZD3BL hybrid conveyor
We also have hybrid versions for all our series of standard conveyors. The look is between a standard and a high end ones, with aluminum finishings, and tough a bit more expensive than the standard ones, it can give a nicer image to your SMT line as a whole. Feel
WH-E100HD12TXL-CALOUVT flash-off conveyor
This unit is used as a visual inspection station for operators controlling the boards right after a conformal coating line.
WH-S150HD3BL-R reject conveyor
These SMEMA-compatible transfer conveyors are specifically used for NG/OK board selection. Usually 1.5m long and with 3 segments, the front rail is stationary while rear rail adjusts to desired width with a hand crank. The middle segment contains a rejection mechanism which lifts up the board which has been detected
WH-S270SDNBXL-DW insertion conveyor
This unit is used in a manual line before soldering section. For the operator to insert component manually.
WHM-021SD3BM manual lifting conveyor
This unit is used to allow passage across the line when required.
We also have hybrid versions for all our series of standard conveyors. The look is between a standard and a high end ones, with aluminum finishings, and tough a bit more expensive than the standard ones, it can give
WHM-022SD3BL lowering gateconveyor
This unit is used to allow passage across the line when required. Lowering Gate Conveyor operates the lowering & lifting of the gate conveyor by push buttons. The eFLEX SMT Lowering Gate Conveyor is fitted with safety sensors to stop any accidents occurring.
WHM-023SD3BL telescopic gateconveyor
This unit is used to allow passage across the line when required. Telescopic Gate Conveyor uses a very swift and smooth retraction and extension of the conveyor across busy walkways. The eFLEX SMT Telescopic Gate Conveyor is fitted with safety sensors to stop any accidents occurring.