WH-S150HD3BL-R reject conveyor

Available on backorder

These SMEMA-compatible transfer conveyors are specifically used for NG/OK board selection. Usually 1.5m long and with 3 segments, the front rail is stationary while rear rail adjusts to desired width with a hand crank. The middle segment contains a rejection mechanism which lifts up the board which has been detected as NG by a previous machine and informed by SMEMA. Conveyor speed of each segment is individually dial adjustable from 0.5 – 20 m/min. The boards which are lifted in the center can be removed and inspected on the work ledge adjacent to the front rail, which will come covered with a green ESD surface. Made by aluminum and steel, it gives a professional look.

Machine dimensions(L)1500x(W)810x(H)900+50/-20mm(L)1500x(W)920x(H)900+50/-20mm
Net weight/Shipping weight80 Kg/110 Kg85 Kg/115 Kg
PCB size50 x 50mm ~ 460 x 350mm50 x 50mm ~ 460 x 460mm
PCB thickness0.4mm ~ 2.5mm
Conveyor directionLeft to right (standard), Right to left (optional)
Conveyor height950 ± 30mm
Conveyor type3mm ESD flat belt
Conveyor speed0.5 ~ 20m/min
Control systemPLC + Sick sensors
Front-end150mm welded work surface with green ESD top
Back to Top