AFAS Aromatic-Free Acrylic Coating (Spray Grade)

In Stock

AFA-S is a modified version of AFA, formulated for use in atomised spray applicators, and manual HVLP spray guns. AFA-S comes pre-mixed to the correct viscosity for these application methods and is a ‘ready for use’ product without requiring any further mixing by the operator.

It maintains the same properties as the standard version of AFA making it an excellent choice for an LED coating, but is also well suited to a range of other commercial applications.

For full product details including test results please refer to the TDS below. If you still require further information please don’t hesitate to get in touch.


Approvals RoHS Compliant (2015/863/EU): Yes
IPC-CC-830: Meets Requirements
UL746-QMJU2: Approved File Number: E138403
Liquid Properties Appearance: Pale Coloured Liquid
Density @ 20°C (g/ml): 0.84
VOC Content: 85%
Flash Point: Approx. 33°C
Solids content: 15%
Viscosity (mPa s @ 25°C): 35-55
Touch Dry: 10-15 minutes
Recommended Curing Time: 24 Hours @ 25°C
30 Mins @ 70°C
Coverage @ 25µm: 6m2
per litre
Dry Film Coating Colour: Colourless
Operating Temperature Range: -65°C to +125°C
Flammability: UL94 V-0
Thermal Cycling (IPC-CC-830B): Meets Requirements
Coefficient of Expansion: 130ppm
Dielectric Strength: 45kV/mm
Dielectric Constant: 2.5
Surface Insulation Resistance: 1 x 1015 Ω
Comparative Tracking Index: >300 Volts
Dissipation Factor @ 1MHz, 25°C: 0.01
Moisture Resistance (IPC-CC-830B): Meets Requirements

Back to Top