FSC Flexible Silicone Conformal Coating

In Stock

FSC is a specialist conformal coating which has been formulated based on a high quality silicone resin. It is highly flexible for delicate components, while it exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range. It’s an ideal choice for humid environments offering excellent protection from moisture. It can be sprayed, dipped or brushed and is fast drying, allowing for efficient production while it also contains a UV trace, which allows inspection of the PCB after coating to ensure complete and even coverage. FSC is widely used through the rail industry, but is suitable for a rage of high end applications. For full product details including test results please refer to the TDS below. If you still require further information please don’t hesitate to get in touch.

Quantity
Compare

Approvals RoHS Compliant (2015/863/EU): Yes
UL746E-QMJU2: Approved File Number: E138403
IEC 61086-2: Approved
IPC-CC-830: Meets Requirements
MIL-I-46058-C Meets Requirements
Liquid Properties Appearance: Clear translucent liquid
Density @ 20°C (g/ml): 0.96
VOC Content: 55% (Bulk), 76% (Aerosol)
Flash Point: Approx. 27°C
Solids content: 45% (Bulk), 24% (Aerosol)
Viscosity @ 20°C (mPa s): 550
Touch Dry Time @ 20°C: 10-15 minutes
Recommended Drying Time: 24 Hours @ 20°C
4 Hours @ 60°C
2 Hours @ 90°C
Coverage @ 25µm: 18m
2
per litre (Bulk)
Dry Film Coating Colour: Colourless
Operating Temperature Range: -50°C to +125°C
Flammability: Meets UL94 V-1
Thermal Cycling (IEC 60068-2-14): Pass
Coefficient of Expansion: 150ppm
Dielectric Strength: 80 kV/mm
Dielectric Constant: 2.7
Insulation Resistance: 1 x 1020 Ohms/cm
Dissipation Factor @ 100Hz, 25°C: 0.001
Moisture Resistance (IEC 60068-2-78): Pass
Salt Spray (IEC 60068-2-11): Pass

Back to Top