OP9003 Resin Stripper

In Stock

OP9003 is a special non-flammable solvent blend designed to swell and soften cured epoxy, polyurethane and other resins and enable their removal from most substrates.


Approvals RoHS Compliant (2015/863/EU): Yes
Description Packaging Order Code Shelf Life
Resin Remover 5 litre OP9003B5L 36 months
Directions for Use
The solvents in OP9003 will not generally damage metals; however, there may be some corrosion on ferrous
metals if materials are soaked for > 24 hours. OP9003 evaporates very quickly in thin films and so tends to
leave smear marks when wiped over dirty metal surfaces. There is a high risk that plastic substrates will be
attacked by OP9003, so care should be taken when cleaning items containing these materials. It is always
advisable to carry out test applications of the products first to ensure that no damage occurs to the item that is
to be recovered.
Surfaces which are heavily contaminated with thick deposits of cured resin or coatings may require soaking for
prolonged periods of 24 hours or more. The cured resin and coating may be insoluble in the stripper; however,
if this is the case it may become soft and “cheesy” and will either fall away or can be very easily removed by
brush or other tools. The articles to be stripped of cured resin may include finished electronic components or
production equipment such as containers, tools, jigs etc. OP9003 should be soaked in closed containers to
prevent evaporation.
Note: OP9003 contain low boiling materials and hence precautions are needed to prevent build-up of high
concentration in the atmosphere. PPE must be worn at all times during handling; please refer to the MSDS for
more information.

Back to Top