RRS Cured Resin Remover Solvent

In Stock

RRS is a special blend of solvents designed to swell, soften and in some cases dissolve cured coatings and resins, including epoxy and polyurethane chemistries. RRS does not contain methylene chloride


Approvals RoHS Compliant (2015/863/EU): Yes
Typical Properties Appearance Colourless Liquid
Density @ 20°C (g/ml) 0.950
VOC Content (%) 98
Flash Point (°C) -17 CC (Closed cup)
Flammability Flammable
Description Packaging Order Code Shelf Life
Resin Remover Solvent 5 litre RRS05L 12 months
Directions for Use
RRS is highly flammable. This product should only be used in well ventilated areas and away from sources of
ignition. The solvents in RRS will not generally damage metals; however, there may be some corrosion on
ferrous metals if materials are soaked for > 24 hours. There is a high risk that plastic substrates will be attacked
by RRS, so care should be taken when cleaning items containing these materials. It is always advisable to carry
out test applications of the products first to ensure that no damage occurs to the item that is to be recovered.
Surfaces which are heavily contaminated with thick deposits of cured resin or coatings may require soaking for
prolonged periods of 24 hours or more. The cured resin and coating may be insoluble in the stripper; however,
if this is the case it may become soft and “cheesy” and will either fall away or can be very easily removed by
brush or other tools. The articles to be stripped of cured resin may include finished electronic components or
production equipment such as containers, tools, jigs etc. RRS should be soaked in closed containers to prevent
Note: Take special care when opening closed RRS containers as these may be slightly pressurised due to the
volatility of the product. Eye protection must be worn at all times during handling.

Back to Top