HTCX Non-Silicone Heat Transfer Compound Xtra

In Stock

Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any surface where thermal conductivity or heat dissipation is important. It should be applied to the base and mounting studs of diodes, transistors, thyristors, heat sinks, silicone rectifiers and semi-conductors, thermostats,power resistors and radiators.


Approvals RoHS Compliant (2015/863/EU): Yes
Typical Properties Colour: White
Base: Blend of synthetic fluids
Thermo-conductive Component: Powdered metal oxides
Density @ 20°C (g/ml): 2.61
Cone Penetration @ 20°C: 300
Viscosity at 1rpm (Pa s): 127-141
Thermal Conductivity (Guarded Hot Plate): 1.35 W/m.K (calculated)
Thermal Conductivity (Heat Flow): 0.90 W/m.K
Temperature Range: -50°C to +180°C*
Weight Loss after 96 hours @ 100°C: <0.40%
Permittivity @ 1 GHz: 4.2
Volume Resistivity: 1 x 1014 Ohms-cm
Dielectric Strength: 42 kV/mm
*Application dependent; excursions to higher temperatures may be possible, testing in end-use conditions is advised.
Description Packaging Order Code Shelf Life
Heat Transfer Compund Xtra 35 ml Luer Lock Syringe HTCX35SL 48 months
100ml Tube HTCX100T 48 months
700g Cartridge HTCX700G 72 months
1 Kg Bulk HTCX01K 72 months
12.5 Kg Bulk HTCX12.5K 72 months

Back to Top