Approvals RoHS Compliant (2015/863/EU): Yes
Typical Properties Colour: White
Viscosity @ 1rpm (Pa s): 140-150
Consistency: Non-Slump Paste
Density @ 20°C (g/ml): 2.3
Shrinkage on Cure >0.2%
Skin Forming Rate*: 10-15 minutes
Cure Time @ 20°C*: 24 hours
*Curing rate and skin forming is dependent upon ambient conditions of temperature and humidity
Cured Properties: Thermal Conductivity: 1.8 W/m.K
Temperature Range: -50 to +230ºC
Maximum Operating Temperature (30mins): +250ºC
Shore Hardness: A75
Tensile Strength: 2 MPa
Peel Strength: >4 Kgf (aluminium)
Tear Strength: 1.52 Kgf
Breaking Strength: 4.30 Kgf
Elongation at Break: 300%
Dielectric Strength: >8 kV/mm
Volume Resistivity: 1 x 1014 Ohm-cm
Description Packaging Order Code Shelf Life
Thermally Conductive RTV (Oxime) 75ml Syringe TCOR75S 12 months
Dispensing Gun for 75ml Syringe 1 Unit TCRGUNB Not Applicable
TCOR Thermally Conductive Oxime RTV
In Stock
Electrolube TCOR is a single component, 100% solids, low odour RTV which cures upon exposure to atmospheric moisture. The product offers a high degree of thermal conductivity and is suitable for use over a very wide temperature range, making it ideal for a wide variety of uses, particularly in automotive applications. Combining the properties of silicone rubber pads with those of a conventional heat transfer paste, TCOR has been designed to fill the gap between the device and heat sink, thus reducing the thermal resistance. It can be applied around components and power resistors to dissipate excess heat to heat sinks, avoiding any potential overheating and subsequent failures. It can be used as a low bond strength adhesive, sealant or gasketing compound.