Approvals: RoHS Compliant (2015/863/EU): Yes
UL Approval: No
Typical Properties
Liquid Properties: Base Material Epoxy
Density Part A – Resin (g/ml) 1.05
Density Part B – Hardener (g/ml) 0.92
Part A Viscosity (mPa s 23°C) 200
Part B Viscosity (mPa s 23°C) 25
Mixed System Viscosity (mPa s 23°C) 100
Mix Ratio (Weight) 4.00:1
Mix Ratio (Volume) 3.40:1
Usable Life (20°C) 120 minutes
Cure Time (40 °C) 24 hours
Cure Time (60 °C) 8 hours
Cure Time (100 °C) 2 hours
Colour Part A – Resin Water White
Colour Part B – Hardener Water White
Storage Conditions Dry Conditions: Above 15ºC, Below 35ºC
Shelf Life 24 Months (Resin packs – 12 months)
Cured System: Cured Density (g/ml) 1.05
Temperature Range (°C) -40 to +120
Max Temperature Range (Short Term (°C)/30 Mins)
(Application and Geometry Dependent) +140
Dielectric Strength (kV/mm) 11
Volume Resistivity (ohm-cm) 1014
ER1426 Water White Epoxy Resin
In Stock
A two part epoxy resin designed for powder bonding and impregnation applications. Its a very low viscosity resin system ideal for use on complicated geometries or around components placed close together, while its long useable life makes it ideal for impregnation.
Its excellent clarity allows for visual inspection of the electronics and components through the resin while its high tensile strength provides good mechanical and physical protection.