Showing 1–16 of 22 results
Categories: Automatic tape dispensers
Automatic Tape Dispenser GL-3000
Freely adjust length, digital display.
Two shift models: automatic and manual.
Length setting memory function available.
Suit for tape with inner diameter 75mm
Two rolls of tapes can be cut at the same time.
Usable tape types: Usable Tape:Filament, polyimide tape used in BGA soldering,Acetate, Glass Cloth, Double-Sided, Plastic, Aluminum Foil, Cellophane, Masking, polyethylene, Copper
Categories: Automatic tape dispensers
Automatic Tape Dispenser RT-7000
A Definite-Length-Tape-Dispensers designed to feed and cut either a pre-determined or random length of pressure sensitive tape. The RT7000 may be used in either a manual or semi-automatic mode. Great for applications in a multitude of industries including; packaging, assembly, electronics, retail, industrial, food service, office and institutions.
Display : LED Read
Categories: PCB separators
Hektor2 PCB separator
Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch
Kolver ACC Series ESD Screw drivers
Model
Code
Capacity
Torque Nm
Speed RPM
Voltage DC
L x Ø mm
Kg.
Controller ACC2210
141910
M3
0,2-1,0
950
230V
35 x 255
0,750
Built-in ACC2220
141920
M4
0,7-2,0
950
230V
35 x 255
0,800
Built-in ACC2222
151222
M4
0,9-2,0
2400
230V
38 x 265
0,850
Built-in ACC2230
151930
M5
1,0-3,0
950
230V
38 x 265
0,850
Built-in ACC2245
151945
M5
1,0÷4,5
450
230V
38 x 265
0,850
Built-in
Kolver Angle Screwdrivers and Nutrunners ESD Screw drivers
Kolver electric right angle screwdrivers and nutrunners are used for easy access in hard to reach applications, for low noise and vibrations, for minimum reaction torque to the operator even at high torque level. FAB and RAF series are available with a wide torque range, with different speeds for different
Categories: Screw feeders
Kolver automatic screw feeder
The automatic screw supplier NFK series is a simple but most effective device which brings screws to pick up position one after the other. A magnetized bit is required to chuck the screw. The new feeders, model NFK-Nxx (the xx stands for the screw size), is supplied with interchangeable spacers between
Kolver BRUSHLESS Series ESD Screw drivers
The new KBL mechanical clutch screwdrivers feature high-quality Swiss brushless motors, the perfect solution for clean room applications thanks to zero emissions of coal dust and other pollutants into the working environment; at the same time the precision of clutch screwdrivers guarantees an accuracy of ±7% or better. Magnetic start
Kolver CA Series ESD Screw drivers
CA screwdrivers are designed for automated and fixtured applications.
They feature:
- Aluminum body for easy and quick clamp;
- Special wiring for specific use with SG controllers with remote start and reverse and torque signal. The PLUTO..CA/FN2 series incorporates the PLUTO DC-controlled electric screwdriver design, supplied in a inline aluminium housing for flange
Categories: Screw drivers
Kolver control unit for FAB
All Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached.
The EDU1FR control units for FAB and RAF screwdrivers feature a
Kolver Controllers EDU series ESD
All Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached.
The EDU1FR control units for FAB and RAF screwdrivers feature a
Kolver FAB series ESD Screw driver
FAB screwdrivers are the "best sellers" in the electronic industry. Lightweight but resistant, compact but powerful, they feature the best performance to weight ratio in the market. All FAB models are ESD, either with lever or push start. Thanks to their advanced ergonomics and unmatched torque accuracy, FAB drivers are
Kolver PLUTO, MITO & NATO Series ESD Screw drivers
PLUTO® (PLUs TOrque) screwdrivers represent a real revolution in the assembly market. Totally designed and manufactured in Europe by KOLVER, PLUTO® tools can reach 50 Nm with a repeatability of +/-5% with a unique electronic torque control system. Priced at the same level as obsolete air tools, PLUTO® screwdrivers are
Kolver RAF series ESD Screw driver
RAF screwdrivers are designed incorporating the latest technology in torque control to meet today's expectations of accuracy and overall performance. With the ever increasing need for ergonomic and ESD screwdrivers, KOLVER RAF series offers innovative body design to reduce instances of carpal tunnel syndrome, and certified ESD-approval, according to SP
Kolver T&A Torque & Angle Series ESD Screw drivers
Industrial tightening may require different control strategies and solutions. The most common cases are: torque control with angle monitoring and angle control with torque monitoring. Kolver Multi-Torque Torque&Angle controller can manage all such strategies, with up to 8 individual P-sets. The Torque/Angle Control The main parameters to be controlled are the tightening