Showing all 8 results
Categories: PCB separators
Hektor2 PCB separator
Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch
Categories: PCB separators
MAESTRO 2/2M PCB separator
MAESTRO 2 separates small amount and prototype series of PCBs fast and economically. The compact and stable aluminum frame requires only a minimum of space.
MAESTRO 2
is the reasonable model to start with, suitable for smaller numbers of PCBs. The PCB is fed manually between the circular blades and is thereby
Categories: PCB separators
Maestro 3E PCB separator
MAESTRO 3E separates both small and large pre-scored PCBs.
The table and the rest can be continuously adjusted to the most suitable working position.
The slit between the linear blade and the rest can be adjusted to ensure that the side strips fall through and are sorted out.
Categories: PCB separators
MAESTRO 4S PCB separator
The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress. Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that can damage sensitive components near the groove. Even a second traverse of the groove accompanied by an adjustment of the
Categories: PCB separators
MAESTRO 5L PCB separator
MAESTRO 5L with base frame is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation.
Machine with base frame - adjustable in height for optimal modification of each application.
PCB panels with maximum width of 310 mm can be separated by
Categories: PCB separators
MAESTRO 6 PCB separator
With the MAESTRO 6 we have consequently further developed our proven PCB separators.
Even very lengthy PCBs are separated fast, economical and stress-free. The power unit of the carriage is right behind the linear blade. This crucially simplifies the separation and removal of the PCBs.
Important features
PCB materials FR4, CEM3 and aluminum
Circular