VEGO Dynamic AMS 07 / Magazine loading system with magazine buffer and automatic magazine change

Available on backorder

The line unloader AMS 07 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of two loading and two unloading conveyors for magazines, two independent lifting axles with magazine platforms, a transfer conveyor with shuttle mechanism to the previous unit and an electrically driven pusher. The unloading conveyors are situated parallel to each other on the lower level and the loading conveyors are situated directly above.
The magazines are transported over the loading conveyor and clamped in place. The pusher then slides the PCB’s into the magazine. The full magazine is then transported over the lower (unloading) conveyor and stored until manual removal.
Features
Automatic magazine change with magazine clamps at the top and the bottom
Loading conveyors situated parallel to each other on the upper level, unloading conveyors situated directly below
Minimal floor space required through optimal positioning of the transport conveyors
Double track loading us

Quantity
Compare
Machine Configuration 
Transport height

Max. transport width

Interface

Transfer direction

Operating side

Fixed rail

850 mm ± 50 mm

460 mm

SMEMA, Siemens

from left to right

Front of the machine

Front of the machine

Panel Dimensions
Panel length

Panel width

Panel thickness

Component clearance

Panel weight

70 to 460 mm

50 to 460 mm

0.5 to 4.5 mm

± 40 mm

to 3 kg

Installation Requirements
Power supply

Power supply system

Power consumption

Air supply

Air consumption

230 V / 115 V, 50 / 60 Hz, ± 10%

L1 + N + PE

0,75 kW

6 bar

10 Nl/min

Machine Description
Length x Width x Height

Netto weight

Noise Level

2485 x 1562 x 1652 mm

570 kg

< 75 dB

Magazine Size
Magazine length

Magazine width

Magazine heigth

Slot spacing

Buffer spacing

Magazine buffer input conveyor

Magazine buffer output conveyor

Single magazine weight

535 mm

530 mm

568 mm

5-20 mm

1-50 Slots

2×3 (2×4)

2×3 (2×4)

max. 30 kg

Back to Top