VEGO Dynamic AMS 06 / Magazine loading/unloading system with magazine buffer and automatic magazine change

Available on backorder

The line unloader AMS 04 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of two loading/unloading conveyors for magazines, a lifting axle with a magazine platform a transfer conveyor to the following unit and an electrically driven pusher. The magazine buffer conveyors are situated parallel to each other and above each other.
The magazines are transported over the loading conveyor onto the magazine platform. The pusher then slides the PCB’s into the magazine. The full magazine is then transported over the unloading conveyor and stored until manual removal.
Automatic magazine change with clamps at the top and the bottom
Loading/unloading conveyors parallel to each other and above each other
Minimal floor space required through optimal positioning of the transport conveyors
Double lift axle model

Machine Configuration 
Transport height

Max. transport width


Transfer direction

Operating side

Fixed rail

850 mm ± 50 mm

460 mm

SMEMA, Siemens

from left to right

Front of the machine

Front of the machine

Panel Dimensions
Panel length

Panel width

Panel thickness

Component clearance

Panel weight

70 to 460 mm

50 to 460 mm

0.5 to 4.5 mm

± 40 mm

to 3 kg

Installation Requirements
Power supply

Power supply system

Power consumption

Air supply

Air consumption

230 V / 115 V, 50 / 60 Hz, ± 10%

L1 + N + PE

0,75 kW

6 bar

10 Nl/min

Machine Description
Length x Width x Height

Netto weight

Noise Level

1880 x 1490 x 1650 mm

< 670 kg

< 75 dB

Magazine Size
Magazine length

Magazine width

Magazine heigth

Slot spacing

Buffer spacing

Magazine buffer input conveyor

Magazine buffer output conveyor

Single magazine weight

410 mm

535 mm

568 mm

5-20 mm

1-50 Slots

5 (7)

5 (7)

max. 30 kg

Back to Top