Showing 33–48 of 79 results
VEGO Dynamic LLE01 / Stacker with buffer for PCB packages
The logistics unloader LLE 01 is used to unload marking stations with bare PCBs.
It combines a buffer station for PCB batches and a restacker station in one unit. The system is designed for correctly sorted stacking of the PCB batches according to the FIFO principle. The stacked PCBs are stored
VEGO Dynamic LSB 03 / PCB destacker
The LSB03 is used to load bare boards for printing or marking into SMT-production lines. The PCB stack is manually loaded into the machine and the separated PCBs are handed over to the downstream system on a transfer conveyor.
The stack is processed from above which ensures gentle separation of the
VEGO Dynamic LSE 03 / PCB stacker
The LSE03 is used to stack bare boards after processes such as marking or after removal from carriers.
The PCB is taken over onto a conveyor and positioned. For stacking, the transport rails are retracted and the PCB falls onto the stack. The weight of the stack is supported on retractable
VEGO Dynamic MPS 100 / Closed process buffer with two PCB magazines
The buffer combines the functionality of magazine loader and unloader in one unit. Incoming PCB’s can be stored in a magazine and on demand from a following unit they can be pushed out and transferred. The unit is equipped with a conveyer underneath the magazine for pass-through mode. This unit
VEGO Dynamic MPS 50 / Inline Magazine buffer for one Magazine
The buffer combines the functionality of a magazine loader and a magazine unloader in one unit. Incoming PCB’s can be stored in a magazine and on demand from a following unit they can be pushed out and transferred. The unit is equipped with a conveyer underneath the magazine for pass-through
VEGO Dynamic MPS 50D / Inline buffer for 2 magazines
Inline magazine buffer for dual lane. The unit consists of a dual lane inlet-conveyor, two independent lifting axles and a dual lane outlet-conveyor. Both lanes are seperatly controlled and are working independent from each other. The magazines are swappedseparately on both sides of the unit.
Features
Double track unit
Built in shuttle mechanism
Single
VEGO Dynamic PPS 70 / Portal buffer with overhead passage
The PPS 70 consists of a lifting mechanism, an overhead conveyor and a vertical buffer belt on the output side of the unit.
Incoming PCB’s are transported upwards with the lift, they are then cycled through the overhead track and transported back down using the vertical buffer belt. The buffer belt
VEGO Dynamic PS 05 / Small capacity vertical processing buffer
The unit temporarily stores PCB’s in vertically aligned transport segments and then transfers them to the following unit. Arriving PCB´s will be stored on horizontal driven conveyorbelts and beeing positioned. With a vertical lift axle the single segments will be positioned for buffering/ unbuffering. Every segment is equipped with a
VEGO Dynamic PS 30 / Medium capacity vertical processing buffer
The buffer receives the PCB’s from upstream and stores them utilising a vertically toothed belt. Once downstream is calling for a board, the buffer will index, down to release the last board. Only LIFO mode is possible.
Features
Open construction
Minimal floor space required
Simple operation
Electric width adjusting
Manual removal of PCB’s
Possible use as either
VEGO Dynamic STM 03 / Shuttle module for lateral displacement of modules
The STM 03 shuttle is designed for insertion and removal of PCB‘s from two production lines as well as lateral displacement. Incoming PCB‘s are taken over by the integrated conveyor segment, moved laterally and handed over to the next machine. The takeover and handover positions are freely programmable.
Features
Stepper motor with
VEGO Dynamic STM 03D / Shuttle module for lateral displacement of modules within dual lane system
The STM 03D Shuttle module is created to space out PCB’s in SMD production lines within dual lane system. Incoming PCB‘s are taken over by the integrated conveyor segment, moved laterally and handed over to the next machine. The takeover and handover positions are freely programmable.
Features
Stepper motor with positioning control
Programmable
VEGO Dynamic TDM 06 / Walkthrough Telescope Gate within production lines
The TDM 06 walkthrough telescope gate provides an intermediate passageway through a production line with no lasting effect on the production flow. The basis model consists of a telescopic conveyor with a horizontal moving conveyor mechanism.
The PCB is taken over at the inlet and the horizontal conveyor extends to hand
VEGO Dynamic TRM 01-04 / Conveyor modules
TRM transport modules are used to buffer or transfer PCBs between process machines. The strong steel tube frame is particularly robust and consists of an integrated control cabinet and a table construction to support the conveyor.
The PCB is taken over from the upstream system and handed over to the downstream
VEGO Dynamic WS 01 / 180° inline flip station for PCB’s
The WS01 is used to flip PCBs in production lines for backside assembly or marking.
The PCB is halted with a stopper and the complete transport mechanism flips around 180° in the direction of transport. The PCB is subsequently handed over to the downstream machine.
Features
Color display with graphical user interface
Product parameters
WH-C100HD3BL high-end conveyor
We also have high-end versions for all our series of standard conveyors. The look is nicer, with aluminum finishings, and tough a bit more expensive than the standard ones, it can give a nicer image to your SMT line as a whole. Feel free to inquire for details about this
WH-C100SD3BL standard conveyor
These SMEMA-compatible transfer conveyors are used for equipment linking, visual inspection, manual assembly, and PCB buffering functions. With a range going from 1m to 2.5m long, the front rail is stationary while rear rail adjusts to desired width with a hand crank. Conveyor speed is dial adjustable from 0.5 -