Showing 49–64 of 129 results
VEGO Compact BRS 03 / Rework Station with three segments
The Rework Station is mostly placed after an Automatic Optical Inspection System (AOI). It is equipped with three singlelane segments with a length of 530 mm each. The segments consist of two rails with separately driven transport belts. After receiving signals from the AOI “bad” PCBs are lifted on the
VEGO Compact BST 01 / Bare Board Stacker
The Bare Board Unloader collects PCBs at the end of the production line into a single stack. The incoming PCB is positioned on the integrated conveyor.
A lift unit then ads the PCB to the bottom of the stack. The maximum stack height is 200 mm and can be removed manually.
VEGO Compact BTT 01 / Turn Table
The Turn Table is typically located in a SMD line which requires a 90 degree turn or a sorting feature. The conveyor segment is mounted on an pneumatic turn table and PCBs are routed based upon the run mode or an external signal. Possible run modes are pass through, load,
VEGO Compact BUL 01 / Line Unloader for one magazine
The Line Unloader receives PCBs from upstream and transfers them via an integrate conveyor segment and an electrical pusher arm into a magazine. Once a PCB is loaded in the magazine, the magazine platform will index to the next slot. A programmable pre-warning limit will alert an operator to change
VEGO Compact BUL 03 / Line Unloader for two magazines
The Line Unloader unloads PCBs from upstream and loads them into magazines. The magazine platform can accommodate up to two magazines. The integrated side shuttle distributes board to either magazine. An electrical pusher arm moves the PCBs into the magazine.
Once a PCB is loaded, the magazine platform will index to
VEGO Compact BUL 04 / Line Unloader for 3 – 5 magazines with automatic magazine change
The Line Unloader BUL 04 is used to automatically unload PCB‘s from an SMT-production line into magazines. It is equipped with an automatic magazine change for a continuing production process. It can easily be adapted to any magazine size. 3 to 5 magazines can be loaded in a row.
The machine
VEGO Dynamic AEM 02 / Transfer unit used to connect corners or crossings
The AEM 02 is used for changing the direction in production lines. Subsequently, it can also be used to split or combine lines.
The integrated rotating and linear drive guarantees great flexibility and makes the unit very variable to use. The machine is based on a stable steel frame which can
VEGO Dynamic AES 01 / Magazine unloader with a platform for one magazine
The line loading station AES 01 is used to automatically feed PCB´s into a SMT-production line or into individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
The AES01 uses an electrically driven pusher to slide the PCB`s out of the magazine and onto the
VEGO Dynamic AES 03 Speed / Line loader with capacity for three magazines
The line loading station AES 03 Speed is used to automatically feed PCB´s into a SMT-production line or into individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
The PCBs are taken out of the magazine with an extractor mechanism and pulled onto the handover
VEGO Dynamic AES 03D / Line loader with a platform for two magazines
The loading station AES 03D is used to automatically feed PCBs into an SMT-production line or into individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
The PCBs are taken out of the magazine with an extractor mechanism and pulled onto the handover conveyor. The
VEGO Dynamic AES 04 / Magazine unloader with magazine buffer and automatic magazine change
The line loader AES 04 provides automatic magazine exchange for continuous loading out of a magazine. The unit consists of a loading and an unloading conveyor for magazines, a lifting axle with a magazine platform, an electrically driven pusher and an outlet conveyor for handover PCB´s to downline machine.
The magazines
VEGO Dynamic AMS 01 / Magazine loader with capacity for one magazine
The line unloading station AMS 01 is used to automatically unload PCB´s from a SMT-production line or from individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
The unit receives PCB’s from the previous unit on an integrated conveyor. An electrically driven pusher then slides
VEGO Dynamic AMS 03 Speed / Line unloader with capacity for three magazines
The line unloading station AMS 03 Speed is used to automatically unload PCBs from SMT-production line or from individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
Arriving PCBs are taken over on the inlet conveyor and then transported horizontally and vertically on an integrated
VEGO Dynamic AMS 03D / Magazine loader with capacity for two magazines
The loading station AMS 03D is used to automatically unload PCBs from an SMT-production line or from individual process machines e.g. stencil printers, pick and place systems, reflow ovens or test systems.
Arriving PCBs are taken over onto the inlet conveyor and then transported sideways on an integrated shuttle and subsequently
VEGO Dynamic AMS 04 / Magazine loader with magazine buffer and automatic magazine change
The line Unloader AMS 04 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of a loading and an unloading conveyor for magazines, a lifting axle with a magazine platform, a buffer conveyor and an electrically driven pusher. The loading conveyor for the magazines is
VEGO Dynamic AMS 05 / Magazine loader with magazine buffer and automatic magazine change
The line unloader AMS 05 provides an automatic magazine exchange for continnous loading into a magazine. The unit consists of a loading and an unloading conveyor for magazines, a lifting axle with a magazine platform, a receiving conveyer for the PCB’s from the previous unit and an electrically driven pusher.