Showing 17–32 of 171 results
AFA Aromatic Free Acrylic Conformal Coating
AFA is an optically clear conformal coating ideally suited for use as an LED coating or in other commercial applications. AFA boasts superb properties, maintaining excellent clarity, with minimal colour temperature shift after prolonged UV exposure making it a superb choice for an LED coating application. While it also provides
AFA-G Aromatic Free Acrylic Coating Gel
AFA-G is a more viscous / Gel like version of the successful AFA conformal coating. It has been designed to be used alongside the other AFA coatings. AFA-G is intended to be dispensed around the base of connectors to act as a permanent masking material. This masking layer will help
AFAF Aromatic-Free Acrylic Coating (Film-Coat)
AFA-F is a modified version of AFA, formulated as a ready for use product suitable for selected film coating machines. It is pre-mixed to the correct viscosity to use and does not require any further mixing - eliminating the margin for error involved when the machine operator is required to
AFAS Aromatic-Free Acrylic Coating (Spray Grade)
AFA-S is a modified version of AFA, formulated for use in atomised spray applicators, and manual HVLP spray guns. AFA-S comes pre-mixed to the correct viscosity for these application methods and is a 'ready for use' product without requiring any further mixing by the operator. It maintains the same properties as
APL Acrylic Protective Lacquer
APL is a flexible, fast drying transparent acrylic conformal coating, used for the protection of electronic circuitry. It has been formulated for professional use only and meets the requirements of a variety of international standards. We also supply APLSP which is formulated for professional use only, supplied to the correct viscosity
Categories: PCB cleaning fluids
Atron AC207 PCB cleaner
Water-based alkaline defluxing agent for sensitive metals
ATRON® AC 207 is specifically designed to operate at low concentration levels. The product was developed to improve the cleaning performance and bath life of traditional surfactant-based cleaners and is particularly gentle on sensitive metals. ATRON® AC 207 can be used in processes with high as
Categories: Maintenance cleaning fluids
Atron SP200 maintenance cleaner
For ultrasonic or air assisted cleaning equipment
ATRON® SP 200 is an aqueous-alkaline surfactant cleaner, specifically developed to remove baked-on fluxes from solder pallets, solder frames and condensation traps. ATRON® SP 200 can also be used for the removal of unsoldered solder pastes from SMT stencils. The cleaner is suitable for ultrasonic, air
Categories: Maintenance cleaning fluids
Atron SP300 maintenance cleaner
For spray-under-immersion or air assisted cleaning, also for cyclones
ATRON® SP 300 is an aqueous-alkaline cleaner, specifically designed to remove baked-on flux residues from cyclones, condensation traps, solder pallets and solder frames. ATRON® SP 300 can be used in single batch cleaning systems with air assisted cleaning and a unit for external cleaning
Categories: Maintenance cleaning fluids
Atron SP400 maintenance cleaner
For spray-in-air cleaning processes
ATRON® SP 400 is a water-based cleaning agent specifically developed to remove baked-on fluxes from solder pallets and condensation traps. ATRON® SP 400 is specially developed for spray-in-air cleaning processes.
Categories: Wipes
Bench clean wipes
Ideal where clean conditions are necessary
A single wiping stroke removes dust, spills, solvents, oils and industrial contaminants
Wipes saturated in ultra-pure chemistry
Designed to eliminate linting
One-stop remedy to keeping work surfaces and areas clean and free of impurities
Available in tubs of 100 pre-saturated wipes and 500ml spray bottles
100-wipe refill packs also available
CCRG Conformal Coating Remover Gel
CCRG thixotropic gel is for the removal of conformal coatings for rework or repair purposes. It has been specifically formulated to remove Electrolube's solvent resistant coatings: DCA, DCB, DCR, DCRT, DCE, WBP/S and PUC. The product does not contain methylene chloride. CCRG will not generally damage metals; however, there may be
Categories: PCB cleaning fluids
Cleaning solvent ULS
Ultrasolve Cleaning Solvent is a fast-drying solvent specially formulated for the quick and efficient cleaning of electrical equipment. It replaces CFC solvents such as 113 trichloroethane due to rapid cleaning and fast evaporation rates. Ultrasolve is 100% Ozone Friendly.
CPL Clear Protective Lacquer
CPL is a general purpose colourless coating designed to protect printed circuit boards from environmental attack. The high gloss properties of CPL also make it an ideal choice for over-coating applications where cosmetics are a contributing factor. It is also suited for protecting ferrous metals from corrosion. CPL can be
DCA SCC3 Conformal Coating
DCA is a unique Modified Alkyd conformal coating specifically formulated to meet the highest defence standards in both Europe and the United States. Based on silicone, it is a highly flexible coating making it ideal for small or delicate components, while also maintaining protection through an extremely wide operating temperature