Showing 81–96 of 171 results
HTCX_ZF Zinc Free Non-Silicone Heat Transfer Compound
HTCX_ZF is a Zinc Oxide free version of Electrolube's highly successful Heat Transfer Compound Xtra (HTCX). HTCX_ZF is both silicone free and zinc oxide free which makes it an ideal choice for applications where marine pollutants or silicones are restricted such as offshore utilities. It offers efficient thermal conductivity for
HTS Silicone Heat Transfer Compound
Silicone Heat Transfer Compound is a metal oxide filled silicone oil providing an extremely efficient and exceptionally thermally conductive compound which will operate over a wide temperature range. Electrolube Heat Transfer Compound is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between
HTSX Silicone Heat Transfer Compound Xtra
HTSX is a silicone thermal interface material (TIM) which has been developed to perform in more extreme conditions than its sister product HTS. It exhibits extended characteristics to HTS, with higher thermal conductivity, extended operating temperatures and excellent stability with a much-reduced oil bleed. It is a non-curing thermal paste, making
Categories: Stencil cleaning fluids
Hydron SC300 stencil cleaner
Water-based, single-phase stencil cleaner
HYDRON® SC 300 is a water-based, single-phased cleaning agent for SMT stencils at room temperature. It reliably removes solder pastes and especially SMT adhesives in one single process and does not leave any adhesive pigment residues. The cleaning agent is recommended for cleaning and rinsing and dries
IMC Industrial Machine Cleaner
IMC has been specifically designed for the general cleaning of automated dispensing equipment. With a high flash point, low vapour pressure and low hazard rating, IMC combines safety and performance across a broad range of applications.
Categories: Maintenance cleaning fluids
IPA/DI Fluid
General purpose cleaner that can be used throughout the production process
Evaporates quickly without trace after cleaning has been completed
Sterile cleaner that leaves surfaces and items free of contamination
70% isopropyl alcohol, 30% de-ionised water
Available in 500ml spray bottles and 5L fluid containers
Categories: Wipes
IPA/DI Wipes
General purpose cleaner that can be used throughout the production process
Evaporates quickly without trace after cleaning has been completed
Sterile cleaner that leaves surfaces and items free of contamination
70% isopropyl alcohol, 30% de-ionised water
Available in tubs of 100 or 210 pre-saturated wipes and 100-wipe refill packs
Categories: Wipes
IPA/DI wipes refill pack
General purpose cleaner that can be used throughout the production process
Evaporates quickly without trace after cleaning has been completed
Sterile cleaner that leaves surfaces and items free of contamination
70% isopropyl alcohol, 30% de-ionised water
Available in tubs of 100 or 210 pre-saturated wipes and 100-wipe refill packs
LFCC Lead Free Conformal Coating
LFCC spray coating is a flexible modified silicone conformal coating specifically designed for the protection of electronic circuitry processed with lead free soldering products. It has been formulated to offer excellent adhesion properties to these lead free flux resides while maintaining the high specification required of conformal coatings in today's
LOT Low Odour Thinner
Electrolube LOT is a low odour thinner developed for use with URC conformal coating. LOT may be mixed with URC for use in dip coating or atomised spay application to reduce and maintain the required levels of viscosity.
LTC Aromatic Free Low Temperature Coating
Electrolube LTC is a clear finish, fast-drying, tough and highly flexible, modified synthetic rubber conformal coating, designed specifically for the protection of high-performance electronic circuitry. Due to its unique base resin, LTC maintains its flexibility at extremely low temperatures and provides extremely low moisture vapour permeability. This readily repairable coating
MCS Moisture Cure Silicone Conformal Coating
MCS is a low viscosity, solvent free silicone conformal coating featuring a moisture cure mechanism that is designed to be touch dry in 10 mins at ambient temperature of 25°C. A full cure is achieved in less than 48 hours. This cure time may also be accelerated with heat for
MDT Medium Dry Thinner
Electrolube MDT is a specialist conformal coating thinner formulated for use with the acrylic coating HFAC. It is a high purity solvent blend which allows HFAC to be diluted for spray or dip applications. MDT can also be used to aid cleaning of machinery which has recently used HFAC.
Categories: USC rolls
MPM cleanmaster rolls
MPM Sontara Cleanmaster Screen Cleaning Rolls are designed with a non-woven, extra strength material that has excellent wetting characteristics
Ideal for absorbing paste, solvents and adhesives
Convert this material to suit a variety of stencil printing machines
Super high absorbency
High durability
Versatile in wide range of wiping applications
Low linting and particle generation
OP9003 Resin Stripper
OP9003 is a special non-flammable solvent blend designed to swell and soften cured epoxy, polyurethane and other resins and enable their removal from most substrates.