Approvals RoHS Compliant (2015/865/EU): Yes
MIL Approval (MIL-1-46058C): Meets approval
IPC-CC-830: Meets approval
Liquid Properties Appearance: Milky White
Density @ 20°C (g/ml): 1.03
VOC Content: <10%
Flash Point: >100°C
Solids content: 35%
Viscosity @ 20°C (mPa s): 180-220
Touch Dry: 25-35 minutes
Recommended Drying Time: 24 hours @ 20°C, or 2 hours 20°C
followed by 2 hours @ 60°C
*Optimum properties achieved after 7 days
Coverage @ 25µm: 14 m²
Dry Film Coating Colour: Clear transparent
Operating Temperature Range: -60°C to +125°C
Flammability: Meets UL94-V1
Thermal cycling (MIL-1-46058C): Pass
Coefficient of Expansion: 125 ppm
Dielectric Strength: 50 kV/mm
Dielectric Constant: 2.6
Surface Insulation Resistance: 5 x 1011 Ω
Dissipation Factor @ 1MHz, 25°C: 0.03
Moisture Resistance (MIL-1-46058C): Pass
WBP / WBPs Aquacoat Plus
In Stock
Aquacoat Plus is a clear transparent water based conformal coating, based on polymeric materials which has been specifically formulated for the protection of electronic circuitry. It offers an excellent blend of both physical and electrical properties whilst eliminating the need for extraction and other precautions associated with the application of conventional solvent based conformal coatings. Aquacoat Plus is non-flammable and contains very low levels of VOC’s. Aquacoat Plus is available in two formulations. WBP is our standard material for use in dipping applications, whilst WBPS (Sprayable) is a lower viscosity product formulated for hand spraying equipment. Both variants have a UV trace for ease of inspection. For full product details including test results please refer to the TDS below. If you still require further information please don’t hesitate to get in touch.