Showing all 9 results
EGO Dynamic FPS 10B SPI / Closed process buffer within production lines
The buffer station FPS 10B SPI is used to store PCB´s which have been tested as „good“ or bad“.
Bad PCB´s will be always buffered and are only unloaded on request from the operator. On demand, the good PCB´s will be automatically buffered from the downstream system.
The machine is characterized by
VEGO Compact BBS 20 / Buffer System
The BBS 20 buffer station consists of multiple closed conveyor segments built on top of each other for intermediate storage of up to 20 PCBs for subsequent handover to the downstream system.
Arriving PCBs are taken over onto the buffer segment and positioned. If required, the PCBs can be buffered and
VEGO Dynamic FPS 30B / Closed process buffer within production lines
The unit is able to carry temporary 30 PCB’s by vertical arranged conveyors and transfer them to the following unit. Arriving PCB´s will be stored by horizontal driven conveyor belts and being positioned. With a vertical lift axle the single segments will be positioned for buffering/ unbuffering. Every segment is
VEGO Dynamic MPS 100 / Closed process buffer with two PCB magazines
The buffer combines the functionality of magazine loader and unloader in one unit. Incoming PCB’s can be stored in a magazine and on demand from a following unit they can be pushed out and transferred. The unit is equipped with a conveyer underneath the magazine for pass-through mode. This unit
VEGO Dynamic MPS 50 / Inline Magazine buffer for one Magazine
The buffer combines the functionality of a magazine loader and a magazine unloader in one unit. Incoming PCB’s can be stored in a magazine and on demand from a following unit they can be pushed out and transferred. The unit is equipped with a conveyer underneath the magazine for pass-through
VEGO Dynamic MPS 50D / Inline buffer for 2 magazines
Inline magazine buffer for dual lane. The unit consists of a dual lane inlet-conveyor, two independent lifting axles and a dual lane outlet-conveyor. Both lanes are seperatly controlled and are working independent from each other. The magazines are swappedseparately on both sides of the unit.
Features
Double track unit
Built in shuttle mechanism
Single
VEGO Dynamic PPS 70 / Portal buffer with overhead passage
The PPS 70 consists of a lifting mechanism, an overhead conveyor and a vertical buffer belt on the output side of the unit.
Incoming PCB’s are transported upwards with the lift, they are then cycled through the overhead track and transported back down using the vertical buffer belt. The buffer belt
VEGO Dynamic PS 05 / Small capacity vertical processing buffer
The unit temporarily stores PCB’s in vertically aligned transport segments and then transfers them to the following unit. Arriving PCB´s will be stored on horizontal driven conveyorbelts and beeing positioned. With a vertical lift axle the single segments will be positioned for buffering/ unbuffering. Every segment is equipped with a
VEGO Dynamic PS 30 / Medium capacity vertical processing buffer
The buffer receives the PCB’s from upstream and stores them utilising a vertically toothed belt. Once downstream is calling for a board, the buffer will index, down to release the last board. Only LIFO mode is possible.
Features
Open construction
Minimal floor space required
Simple operation
Electric width adjusting
Manual removal of PCB’s
Possible use as either