Showing 33–48 of 112 results
ER2220 Thermally Conductive Epoxy
ER2220 is a flame retardant, thermally conductive, two part encapsulation compound based on epoxy technology. Designed to meet increasing demands for efficient thermal dissipation, ER2220 combines ease of processing with an enhanced thermal conductivity when compared to traditional thermally conductive encapsulants. Combined with flame retardance achieving UL94 V-0 level, ER2220
ER2221 Thermally Conductive Epoxy
ER2221 resin has been formulated as high temperature resistant and thermally conductive potting compound which retains excellent characteristics throughout thermal cycling. ER2221 is coloured black, while ER2222 is a red version, otherwise the cured resins do not differ in their physical properties. Both exhibit excellent thermal resistance up to an
ER2222 Red Thermally Conductive Epoxy
ER2222 is a red variation of Electrolube's ER2221 Thermally conductive Epoxy potting compound. The resins properties are identical to ER2221 but has been formulated with a red finish for aesthetic appearance. It's a highly temperature resistant epoxy with excellent thermal conductivity and a wide operating temperature range -40°C to +150°C retaining
ER2223 High Temperature Resin
ER2223 black epoxy resin has been specially formulated to meet the harsh operating conditions of under-hood applications in the automotive industry. It has excellent chemical resistance, including most fluids found in the engine compartment of vehicles or other mechanical applications offering superb protection to electronic components.
ER2224 Thermally Conductive Resin
ER2224 Epoxy potting compound is a highly thermally conductive resin (1.0 W/m*K) which also offers strong thermal cycling properties. It is an off-white resin allowing it to blend with LED designs, dissipating heat from the LED and extending the units operating lifetime and reliability while offering excellent environmental protection against
ER2225 High Temperature Resistant Epoxy
ER2225 a black epoxy potting compound formulated to meet the exacting requirements of the automotive industry, although will find application in a wide range of industries where high temperature and chemical resistance are called for. Designed as a potting compound for electronic units, or to encapsulate components such as sensors,
ER4001 White Epoxy Resin
ER4001 is a thermally conductive epoxy resin system which is highly temperature resistant, providing full protection up to 150°C. Thanks to its enhanced thermal conductivity; ER4001 is ideal for those applications that require effective heat dissipation, particularly for units with limited spacing. Completely free from abrasive fillers, this product will have
ER4002 Flame Retardant epoxy Resin
ER4002 is an ideal choice for automotive potting and encapsulation applications with an outstanding dielectric strength and flame retardant properties. It has a wide operating temperature range of -40°C to +150°C and good thermal conductivity. Its low mixing viscosity gives it good flow characteristics allowing for potting units which have limited
FPC Fluorinated Polymer Coating
FPC is a specialist ultra-thin fluorinated polymer coating which repels hydrocarbon and silicone oils, synthetic fluids and aqueous solutions, (due to its very low surface energy). Consequently, this product offers superb protection for printed circuit boards and electronics in exposed environments. When dry, FPC has a low film strength and is
FSC Flexible Silicone Conformal Coating
FSC is a specialist conformal coating which has been formulated based on a high quality silicone resin. It is highly flexible for delicate components, while it exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range. It's an ideal choice for humid environments offering
FTH Fast Dry Thinner
FTH is a high purity solvent blend designed for use with Electrolube's fast drying conformal coatings, AFA and PUCAF. The primary use of FTH is to dilute the coating for use in dip and spray coating applications to maintain the correct viscosity. FTH can also be used as a cleaner
GF300 GF300 Gap Filler
GF300 is a two part, liquid silicone based thermally conductive gap filler which cures at room temperature or can be accelerated using heat. It has exceptional thermal performance (3.0 W/m.K) and after curing GF300 forms a low modulus elastomer preventing the 'pump-out phenomenon'.
HCS Heat Cure Silicone Conformal Coating
HCS is a fast curing solvent free silicone conformal coating with 100% solids and is formulated to meet the requirements of UL94 V-0. It is a low viscosity coating which due to its silicone base is flexible with low stress on components whilst remaining tough enough to withstand abrasion. It has
HFAC Acrylic Conformal Coating
HFAC is an acrylic conformal coating for a more environmentally and operator friendly process. As with other acrylic conformal coatings it is a fast drying coating which is durable and can be used in a wide variety of applications for electronics protection. It is an especially high performance coating, well
HFS High Performance Fluorinated Solvent
HFS is a non-flammable, fluorinated solvent designed for use with Electrolube FPC, Fluorinated Polymer Coating. HFS is used to dilute FPC in order to maintain an in-use solids content of around 2%. HFS may also be suitable for general cleaning applications.
HPA High Performance Acrylic Conformal Coating
HPA is a high performance acrylic conformal coating specifically designed to meet the demanding requirements of applications such as the defence and aerospace industries. HPA is fast drying and flexible while maintaining excellent characteristics in the most challenging of environments. HPA has a transparent finish which maintains optical clarity making it