Showing 49–64 of 112 results
HTC Non-silicone Heat Transfer Compound
Electrolube Heat Transfer Compound is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any surface where thermalconductivity or heat dissipation is important. They should be applied to the base and mounting studs of diodes, transistors, thyristors, heat sinks, silicone rectifiers and
HTCA Non-silicone Heat Transfer Compound Aerosol
Electrolube's Non-Silicone Heat Transfer Compound Aerosol is an innovative new way of applying our standard HTC. The aerosol version offers greater ease of use, allowing a thin, even film of HTC to be applied where required. It is especially useful for applications over larger areas. As with all Electrolube aerosols
HTCPX Non-Silicone Heat Transfer Compound PLUS Xtra
HTCPX provides the ultimate in thermal conductivity together with the advantage of using non-silicone base oil. The exceptional properties obtained from HTCPX are due to the novel use of various metal oxide (ceramic) powders. These materials are electrically insulative to ensure that leakage currents can not be formed if the
HTCX Non-Silicone Heat Transfer Compound Xtra
Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any surface where thermal conductivity or heat dissipation is important. It
HTCX_ZF Zinc Free Non-Silicone Heat Transfer Compound
HTCX_ZF is a Zinc Oxide free version of Electrolube's highly successful Heat Transfer Compound Xtra (HTCX). HTCX_ZF is both silicone free and zinc oxide free which makes it an ideal choice for applications where marine pollutants or silicones are restricted such as offshore utilities. It offers efficient thermal conductivity for
HTS Silicone Heat Transfer Compound
Silicone Heat Transfer Compound is a metal oxide filled silicone oil providing an extremely efficient and exceptionally thermally conductive compound which will operate over a wide temperature range. Electrolube Heat Transfer Compound is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between
HTSX Silicone Heat Transfer Compound Xtra
HTSX is a silicone thermal interface material (TIM) which has been developed to perform in more extreme conditions than its sister product HTS. It exhibits extended characteristics to HTS, with higher thermal conductivity, extended operating temperatures and excellent stability with a much-reduced oil bleed. It is a non-curing thermal paste, making
IMC Industrial Machine Cleaner
IMC has been specifically designed for the general cleaning of automated dispensing equipment. With a high flash point, low vapour pressure and low hazard rating, IMC combines safety and performance across a broad range of applications.
LFCC Lead Free Conformal Coating
LFCC spray coating is a flexible modified silicone conformal coating specifically designed for the protection of electronic circuitry processed with lead free soldering products. It has been formulated to offer excellent adhesion properties to these lead free flux resides while maintaining the high specification required of conformal coatings in today's
LOT Low Odour Thinner
Electrolube LOT is a low odour thinner developed for use with URC conformal coating. LOT may be mixed with URC for use in dip coating or atomised spay application to reduce and maintain the required levels of viscosity.
LTC Aromatic Free Low Temperature Coating
Electrolube LTC is a clear finish, fast-drying, tough and highly flexible, modified synthetic rubber conformal coating, designed specifically for the protection of high-performance electronic circuitry. Due to its unique base resin, LTC maintains its flexibility at extremely low temperatures and provides extremely low moisture vapour permeability. This readily repairable coating
MCS Moisture Cure Silicone Conformal Coating
MCS is a low viscosity, solvent free silicone conformal coating featuring a moisture cure mechanism that is designed to be touch dry in 10 mins at ambient temperature of 25°C. A full cure is achieved in less than 48 hours. This cure time may also be accelerated with heat for
MDT Medium Dry Thinner
Electrolube MDT is a specialist conformal coating thinner formulated for use with the acrylic coating HFAC. It is a high purity solvent blend which allows HFAC to be diluted for spray or dip applications. MDT can also be used to aid cleaning of machinery which has recently used HFAC.
OP9003 Resin Stripper
OP9003 is a special non-flammable solvent blend designed to swell and soften cured epoxy, polyurethane and other resins and enable their removal from most substrates.
OP9004 Resin Machine Cleaner
OP9004 is a special non-flammable solvent blend designed to swell and soften cured epoxy, polyurethane and other resins and enable their removal from most substrates. OP9004 is somewhat slower in evaporation rate than OP9003 and hence is more suitable for cleaning machines by wiping.
OP9020 Uncured Resin Remover Solvent
OP9020 is a specially formulated solvent designed to remove epoxy and polyurethane resin in the uncured state from machines, work surfaces, jigs or equipment. Its a fast evaporating solvent which can be used to soak items in, or used to wipe with a brush or cloth